Graver Fine-Membrane Filter(ZTEC E)
General Description
ZTEC E microelectronics grade cartridges represent Graver’s
latest development in ultrapure water filtration technology.
The filters are inherently hydrophilic and contain no added
surfactants or wetting agents that could contaminate pure
and ultrapure water streams. The PES membrane offers
superior flow characteristics, high contaminant capacity and
consistent removal of sub-micron particles. The cartridges
exhibit rapid rinse-up to 18 MW-cm resistivity and single digit
ppb levels of TOC.
- Manufactured, flushed, tested and packaged, in an ISO Class 7 Cleanroom Environment.
- Filters are100% flushed with 18 MW-cm DI water and integrity tested.
- Resistivity rinse-up to 18 MW-cm and single digit ppb TOC levels with minimal throughput.
- Available in a variety of end cap/adapter configurations to fit all industry-standard housings.
- Pore size, lot and serial number are stamped on each filter element for identification and traceability.
SPECIFICATIONS | |
---|---|
Recommended Change-out D.P. | 2.4 bar |
Max. D.P. | 4.14 bar @ 27°C 2.07 bar @ 71°C 1.03 bar @ 95°C |
Max. Operating Temp. | 82 °C |
Grades | 0.03, 0.1, 0.2, 0.45 μm |
Media | Asymmetric Polyethersulfone membrane |
Hardware | Polypropylene |
Gasket/O-Rings | Buna-N, EPDM, Silicone, Viton, Teflon, Encapsulated Viton O-Rings |